Datasheet4U Logo Datasheet4U.com

MH0026C - 5 MHz two phase MOS clock driver

This page provides the datasheet information for the MH0026C, a member of the MH0026 5 MHz two phase MOS clock driver family.

Description

The MH0026/MH0026C is a low cost monolithic high speed two phase MaS clock driver and interface circuit.

Unique circuit design along with advanced processing provide both very high speed operation and the ability to drive large capacitive loads.

Features

  • Fast rise and fall tlmes-20 ns with 1000 pF load.
  • High output swing-20V.
  • High output current drive-±1.5 amps.
  • TTL/DTL compatible inputs.
  • High rep rate-5 to 10 MHz depending on load.
  • Low power consumption in MaS "0" state2 mW.
  • Drives to O.4V of GND for RAM address drive The MH.

📥 Download Datasheet

Datasheet preview – MH0026C

Datasheet Details

Part number MH0026C
Manufacturer National Semiconductor
File Size 594.88 KB
Description 5 MHz two phase MOS clock driver
Datasheet download datasheet MH0026C Datasheet
Additional preview pages of the MH0026C datasheet.

📁 Similar Datasheet

  • MH005 - Power Modules (Tyco)
  • MH04 - Micro PowerHall Effect Sensors (Standex Meder)
  • MH07N60CT - Silicon N-Channel Power MOSFET (CITC)
  • MH07N65CT - Silicon N-Channel Power MOSFET (CITC)
  • MH0810 - COMPLEMENTARY EPITAXIAL TRANSISTORS FOR 3-5W AF OUTPUT (Micro Electronics)
Other Datasheets by National Semiconductor
  • MH0026 - 5 MHz two phase MOS clock driver
  • MH0025 - two phase MOS clock driver
  • MH0025C - two phase MOS clock driver
  • MH0007 - dc coupled MOS clock driver
  • MH0007C - dc coupled MOS clock driver
  • MH0009 - dc coupled two phase MOS clock driver
  • MH0009C - dc coupled two phase MOS clock driver
  • MH0012 - high speed MOS clock driver

Full PDF Text Transcription

Click to expand full text
Memory/Clock Drivers MH0026/MH0026C 5 MHz two phase MOS clock driver general description The MH0026/MH0026C is a low cost monolithic high speed two phase MaS clock driver and interface circuit. Unique circuit design along with advanced processing provide both very high speed operation and the ability to drive large capacitive loads. The device accepts standard TTL/DTL outputs and converts them to MaS logic levels. It may be driven from standard 54/74 senes gates and flip-flops or from drivers such as the DMSS30 or DM7440. The MH0026 is intended for applications in which the output pulse width is logically controlled: i.e., the output pulse width is equal to the Input pulse width.
Published: |